Elan BOX set in JARS for eyebrow and eyelash lamination SUPERSONIC

Professional set is designed for eyebrow and eyelash flexing procedure.

The set consists of:

1. Expert eyebrow and eyelash flexing system "SUPERSONIC 2.0" Serum 1 CLEAR (10 ml) — 1 pc.

2. Expert eyebrow and eyelash flexing system "SUPERSONIC 2.0" Serum 2 (10 ml) — 1 pc.

3. Expert eyebrow and eyelash flexing system "SUPERSONIC 2.0" Multivitor (10 ml) — 1 pc.

Important! Expert eyebrow and eyelash flexing system "SUPERSONIC" is designed exclusively for professional use!

Important! Serum 1, Serum 2 and Serum 3 Multivitor must be used in combination.

Shelf life: 24 months

Shelf life after opening: 6 months

STAGES OF THE EYEBROW FLEXING PROCEDURE

1) Diagnosis of the condition of the client's eyebrow hairs and determination of the exposure time of the flexing products according to the points indicated below:

1st group: eyebrow hairs are coarse, hard and dense, not previously treated with chemicals (dyeing, lightening procedures) - exposure time 5-8 minutes for Serum 1 and not less than 6-8 minutes for Serum 2;

2nd group: eyebrow hairs of medium thickness, natural, healthy or previously treated with chemicals (dyeing, lightening procedures) - exposure time 3-5 minutes for Serum 1 and 6-8 minutes for Serum 2;

The Multivitor exposure time is 5 minutes for all hair groups.

IMPORTANT! The maximum exposure time for Serum 1 and Serum 2 is 15 minutes.

IMPORTANT! The activity of Serum 1 and Serum 2 is directly proportional to the air temperature in the room. The higher the temperature, the faster the reaction.

2) Preparation for the eyebrow flexing procedure

Use "ÉLAN DETOX-MOUSSE 2.0" to cleanse the hairs and skin before the eyebrow flexing procedure. Remove the foam with a cotton pad moistened with water.

3) Creating the eyebrow shape (Serum 1)

IMPORTANT! If the client has thin and sensitive skin, it is necessary to apply the cream with argan oil TM ÉLAN professional line to the eyebrows (with a thin layer) and to the skin areas around the eyebrows (with a thick layer).

1. Apply Serum 1 to the eyebrows. Exposure time 3-8 minutes.

IMPORTANT! The maximum exposure time should not exceed the exposure duration for the selected hair group.

2. After the exposure time, remove the remaining product with a cotton pad moistened with water.

IMPORTANT! At the stage of creating the eyebrow shape, the direction of growth of the client's hairs should be taken into account. Changes should be smooth to prevent the appearance of creases.

4) Fixing the direction of the hairs (Serum 2)

IMPORTANT! If the client has thin and sensitive skin, it is necessary to apply the cream with argan oil TM ÉLAN professional line to the eyebrows (with a thin layer) and to the skin areas around the eyebrows (with a thick layer).

1. Apply Serum 2 to the eyebrows and distribute it over the entire surface of the hairs, carefully laying them in the required direction. Exposure time 6-8 minutes.

IMPORTANT! The exposure time at stage IV (Serum 2) should be equal to the exposure time at stage III of creating the eyebrow shape (Serum 1), but not less than 6 minutes.

2. After the exposure time, remove the product residue with a cotton pad moistened with water, if you plan to dye your eyebrows after the flexing procedure.

3. After the exposure time, remove the product residue with a cotton pad moistened with "ÉLAN DETOX-MOUSSE 2.0" to complete the chemical reaction, if you do not plan to dye your eyebrows after the flexing procedure. Wash off the foam with a cotton pad moistened with water.

5) Hair care (Multivitor)

1. Apply Multivitor to the eyebrows and distribute it over the entire surface of the hairs. Exposure time: 5 minutes.

2. After the exposure time, remove the product residues with a cotton pad moistened with water, if you do not plan to dye your eyebrows after the flexing procedure.

3. After the exposure time, remove the product residues with a cotton pad moistened with “ÉLAN DETOX-MOUSSE 2.0” to complete the chemical reaction, if you plan to dye your eyebrows after the flexing procedure. Wash off the foam with a cotton pad moistened with water.

4. Apply the coloring mixture to your eyebrows immediately after applying ÉLAN DETOX-MOUSSE.

IMPORTANT! It should be noted that during the dyeing process, the color on the hairs will be more saturated and will appear faster.

5. To fix the result, in particular, after the eyebrow dyeing procedure, apply ÉLAN professional line COLOUR FIX 2.0 color fixer to the eyebrows.

IMPORTANT! Eyebrow correction is performed only after the flexing procedure. We recommend performing the correction with tweezers for less skin damage.

STAGES OF PERFORMING THE EYELASH FLEXING PROCEDURE

1) Diagnosis of the condition of the client's eyelashes and determination of the exposure time of the flexing products according to the points indicated below:

1st group: eyelashes are coarse or straight - exposure time 6-10 minutes for Serum 1 and at least 6 minutes for Serum 2;

2nd group: eyelashes of medium thickness or thin - exposure time 3-6 minutes for Serum 1 and at least 6 minutes for Serum 2;

The Multivitor exposure time is 5 minutes for all hair groups.

IMPORTANT! The maximum exposure time of Serum 1 and Serum 2 is 15 minutes.

IMPORTANT! The activity of Serum 1 and Serum 2 is directly proportional to the air temperature in the room. The higher the temperature, the faster the reaction.

2) Preparation for the eyelash flexing procedure

1. Use ÉLAN DETOX-MOUSSE to cleanse the hairs before the eyelash flexing procedure. Remove the foam with a cotton pad moistened with water.

2. Fix the silicone roller of the required size on the upper eyelid.

3. Distribute and fix the eyelashes on the roller with the fixing gel for eyelash lamination TM ÉLAN professional line and an applicator.

3) Eyelash curling (Serum 1)

1. Apply Serum 1 to the area where the eyelash curl is to be formed. Exposure time 3-10 minutes.

IMPORTANT! The maximum exposure time should not exceed the exposure time for the selected hair group.

2. After the exposure time, remove the remaining product with a dry brush in the direction of eyelash growth.

4) Fixing the direction of the eyelashes (Serum 2)

1. Apply Serum 2 to the entire eyelash area with a thick layer. Exposure time 6-10 minutes.

IMPORTANT! The exposure time at stage IV (Serum 2) should be equal to the exposure time at stage III of the formation of the eyelash bend (Serum 1), but not less than 6 minutes.

After the exposure time, remove the remaining product with a dry brush in the direction of eyelash growth.

5) Eyelash care (Multivitor)

1. Apply Multivitor to the entire eyelash area. Exposure time: 5 minutes.

2. After the exposure time, remove the remaining product and fixing gel with a cotton pad moistened with water.

IMPORTANT! To achieve the most expressive effect and visible result, ÉLAN professional line brand technologists recommend performing an eyelash dyeing procedure after completing the eyelash flexing procedure.

RECOMMENDATIONS AFTER THE EYEBROW AND EYELASH FLEXING PROCEDURE

! It is not recommended to perform the eyebrow dyeing procedure with henna or perform the eyebrow lightening procedure, since the result can be extremely unpredictable: the structure of the hairs can be disturbed (overdried hairs without shine), which can lead to their fragility and loss.

! Within 24 hours after the procedure, you should avoid visiting the bathhouse, sauna and solarium, as well as prevent mechanical disruption of the outlined eyebrow shape and the formed eyelash curl (sleeping face down on the pillow), minimize contact with water, and do not comb your eyebrows and eyelashes.

! Within 48 hours after the procedure, you should avoid exposure to aggressive cosmetics and procedures on your eyebrows and eyelashes (scrubs, peels, alcohol-containing lotions, laser procedures).

RESTRICTIONS ON THE EYEBROW AND EYELASH FLEXING PROCEDURE

Absolute restrictions on the eyebrow and eyelash flexing procedure: individual sensitivity to the components in the composition of the products, any skin damage in the eyebrow and eye area, redness, rash of any etiology, as well as visiting a solarium, performing laser and photo procedures 24 hours before the procedure.

PRECAUTIONS

Before use, it is necessary to perform an allergic reaction test: apply 2 drops of each product to a small area of ​​​​skin in the elbow bend 48 hours before use. If there is no redness, swelling or irritation on the skin, you can begin the flexing procedure.

Serum 1 contains thioglycolate. Serum 2 contains hydrogen peroxide. Products may cause an allergic reaction. Use protective gloves. Do not use metal objects when working with products. Avoid contact with eyes. If it gets into your eyes, rinse them immediately with water. If an allergic reaction occurs, be sure to consult a dermatologist.

Composition:

"SUPERSONIC 2.0" Serum 1 CLEAR: AQUA, THIOGLYCOLIC ACID, CYSTEAMINE HCL, CETEARYL ALCOHOL, AMMONIUM HYDROXIDE, ETHANOLAMINE, PROPYLENE GLYCOL, MINERAL OIL, ETHYLHEXYL STEARATE. CETRIMONIUM CHLORIDE, SODIUM SULFITE, SODIUM ERYTHORBATE, CETEARETH-20, DIAZOLIDINYL UREA (AND) METHYLPARABEN (AND) PROPYLPARABEN, PARFUM, DISODIUM EDTA, POLYQUATERNIUM-22, HYDROLYZED COLLAGEN, HYDROLYZED KERATIN, DIMETHYLCYCLOHEXYL 3-BUTENYL KETONE, METHYL DECENOL, MICA (AND) CI 45410 (AND) LAUROYL LYSINE.

"SUPERSONIC 2.0" Serum 2: AQUA, CETYL ALCOHOL, GLYCERIN, CETEARYL ALCOHOL, HYDROGEN PEROXIDE, PARAFFINUM LIQUIDUM, CERATONIA SILIQUA (CAROB) SEED EXTRACT, HYDROLYZED SOY PROTEIN, HYDROLYZED COLLAGEN, POLYQUATERNIUM-7, POLYQUATERNIUM-16, ZEA MAYS (CORN) STARCH, ARGANIA SPINOSA KERNEL OIL, CETEARETH-33, TETRASODIUM EDTA, PHOSPHORIC ACID, SODIUM BENZOATE, BENZOIC ACID, PHENOXYETHANOL, POTASSIUM SORBATE.

"SUPERSONIC 2.0" Multivitor: AQUA, CETEARYL ALCOHOL, GLYCERIN, ISOPROPYL PALMITATE, PARAFFINUM LIQUIDUM, CYCLOPENTASILOXANE, BETAINE, HYDROLYZED WHEAT PROTEIN, HYDROLYZED SOY PROTEIN, CETEARETH-20, PEG-8, PEG-8/SMDI COPOLYMER, SODIUM POLYACRYLATE, CETRIMONIUM CHLORIDE, DIMETHICONOL, BHT, PALMITOYL MYRISTYL SERINATE, PHENOXYETHANOL, ETHYLHEXYLGLYCERIN, PARFUM, CITRIC ACID, BENZYL SALICYLATE, HYDROXYCITRONELLAL, Cl 60730.