Sculptor Lash permanent eyebrow preparation Flexi line brow "Keramass №3", 1.5 ml
-
132 грн.
Product code: 9710
Availability
Free shipping
International shipping
Delivery in Kiev
Advantages of the Flexi Line Brow eyebrow lamination system
- Dermatologist approved;
- operates stably, efficiently and carefully;
- does not dry out hairs at the first stages of the procedure;
- does not disturb the pH balance of the skin;
- gives the hairs the desired direction;
- deeply restores eyebrows;
- stimulates hair growth;
- moisturizes, protects and soothes the skin and eyebrow hairs, making them vibrant and healthy.
The composition contains 2 powerful complexes based on plant extracts and proteins, as well as tetrapeptide and important amino acids.
KeramatchTM V is a powerful protein blend derived from plant sources that acts as an alternative to animal keratin. Replicating the functional characteristics and benefits of animal-derived keratin, the complex improves the strength and quality of hairs, especially damaged and brittle ones.
AkoskyTM Azuki is a mixture based on herbal extracts Trifolium pratense/Vigna radiata sprout extract. Thanks to this complex, the growth of eyebrow hairs is stimulated, their life cycle is regulated, and their length and strength increases.
Acetyl tetrapeptide-5 promotes the proliferation of keratinocytes within hairs, which acts as a growth stimulator.
Amino acids (glycine, histidine, lysine, arginine)
The basic units of protein fibers that make up the hairs strengthen and make the shaft stronger, thicker, denser and stronger. These are essential amino acids that are essential materials for proteins.
Exposure time: from 5 minutes
until completely dry on the eyebrow hairs
pH: 5.94
Instructions for Sculptor Flexi Line Brow compositions
1. Eyebrow cleansing. Apply a small amount of foam to your eyebrows using a nylon brush. Comb eyebrows in the direction of hair growth. Do not move against the growth, this will cause mechanical damage to the hairs. When cleaning the eyebrows with a brush, do not press it hard so as not to injure the upper epidermal layer of the client’s skin. After cleansing your eyebrows with foam, rinse it thoroughly with a damp cotton pad. If there is persistent decorative cosmetics or an eyebrow styler on the eyebrows, repeat the procedure until the cotton pad and eyebrow area are clean. After completing cleansing, be sure to dry your eyebrows.
2. Application of composition No. 1 - Lifting. Squeeze the composition onto the glove, into a glass/plastic container or into a SCULPTOR silicone palette (metal containers are prohibited). Using a silicone or synthetic brush, apply the product to the eyebrows, starting from the head towards the body and tail. When applying, it is advisable to immediately set the desired direction for laying out the hairs. Select the exposure time depending on the density of the eyebrows, the porosity of the hairs, and changes in the artificial direction of the hairs compared to the natural one. Leave the composition on the eyebrows for: 6-8 minutes on thin hairs; 8-10 minutes on medium; 10-12 minutes for thick ones.
After the exposure time has expired, remove the drug using a dry cotton pad, without stretching the skin or pulling the hairs, so as not to injure them.
If there are hairs that do not lie in the desired direction, use a brush or brush to arrange them as needed for laying out the eyebrows. Since there may be different types of hairs on different parts of the eyebrow, the drug can be removed locally and immediately apply composition No. 2 - Fixing - to the corresponding areas. This will stop the reaction and not damage the hairs further while waiting for the permanent composition to be removed from other parts of the eyebrows.
3. Application of composition No. 2 - Fixing. Squeeze the composition onto the glove, into a glass/plastic container or into a SCULPTOR silicone palette (metal containers are prohibited). Using a silicone or synthetic brush, apply the product to the eyebrows, starting from the head towards the body and tail, or in the sequence in which composition No. 1 - Lifting was locally removed. Select exposure time. Leave the composition on the eyebrows for: 7-8 minutes on thin hairs; 8-10 minutes on medium; 10-12 minutes for thick ones. After the exposure time has expired, remove the drug using a damp cotton pad in the direction of the hairs. Dry your eyebrows using a dry cotton pad.
4. Application of composition No. 3 - Keramass. Pour the mixture into a glass/plastic container or into a SCULPTOR silicone palette. Using a brush or nylon brush, apply the product to the eyebrows. Wait at least 5 minutes or until the product dries completely; if there is a lot of it, remove the residue with a damp cotton pad. If the application was only on the hairs, you can correct and color the eyebrows without removing the residue. This way you can achieve hair coloring without darkening.
5. Marking and correction of eyebrows. Make markings using a technique that is convenient for you and perform eyebrow correction. It is recommended to do correction with tweezers or a mixed correction: tweezers + wax, but apply wax only in the area where there were no compounds, so as not to injure the skin with an excess of aggressive procedures.
6. Eyebrow tinting. Tint your eyebrows using SCULPTOR Eyebrow Gel Tint, a dye based on water-soluble components or with an oxidizing percentage of 2%. Painting should be done with synthetic brushes. Application is carried out according to the scheme selected by the master for the client. After the paint exposure time has expired, remove it with a damp cotton pad. Dry your hair completely using a dry cotton pad.
7. Application of composition No. 4 - Calming. Squeeze the composition onto the glove, into a glass/plastic container or into a SCULPTOR silicone palette (metal containers are prohibited). Using a silicone or synthetic brush, apply the product to the eyebrows, starting from the head towards the body and tail. Leave for 5 minutes, after the exposure time has expired, remove the residue with a dry cloth or leave on the client’s eyebrows until completely absorbed.
Sculptor Lash permanent eyebrow preparation Flexi line brow "Keramass №3", 1.5 ml
Advantages of the Flexi Line Brow eyebrow lamination system
- Dermatologist approved;
- operates stably, efficiently and carefully;
- does not dry out hairs at the first stages of the procedure;
- does not disturb the pH balance of the skin;
- gives the hairs the desired direction;
- deeply restores eyebrows;
- stimulates hair growth;
- moisturizes, protects and soothes the skin and eyebrow hairs, making them vibrant and healthy.
The composition contains 2 powerful complexes based on plant extracts and proteins, as well as tetrapeptide and important amino acids.
KeramatchTM V is a powerful protein blend derived from plant sources that acts as an alternative to animal keratin. Replicating the functional characteristics and benefits of animal-derived keratin, the complex improves the strength and quality of hairs, especially damaged and brittle ones.
AkoskyTM Azuki is a mixture based on herbal extracts Trifolium pratense/Vigna radiata sprout extract. Thanks to this complex, the growth of eyebrow hairs is stimulated, their life cycle is regulated, and their length and strength increases.
Acetyl tetrapeptide-5 promotes the proliferation of keratinocytes within hairs, which acts as a growth stimulator.
Amino acids (glycine, histidine, lysine, arginine)
The basic units of protein fibers that make up the hairs strengthen and make the shaft stronger, thicker, denser and stronger. These are essential amino acids that are essential materials for proteins.
Exposure time: from 5 minutes
until completely dry on the eyebrow hairs
pH: 5.94
Instructions for Sculptor Flexi Line Brow compositions
1. Eyebrow cleansing. Apply a small amount of foam to your eyebrows using a nylon brush. Comb eyebrows in the direction of hair growth. Do not move against the growth, this will cause mechanical damage to the hairs. When cleaning the eyebrows with a brush, do not press it hard so as not to injure the upper epidermal layer of the client’s skin. After cleansing your eyebrows with foam, rinse it thoroughly with a damp cotton pad. If there is persistent decorative cosmetics or an eyebrow styler on the eyebrows, repeat the procedure until the cotton pad and eyebrow area are clean. After completing cleansing, be sure to dry your eyebrows.
2. Application of composition No. 1 - Lifting. Squeeze the composition onto the glove, into a glass/plastic container or into a SCULPTOR silicone palette (metal containers are prohibited). Using a silicone or synthetic brush, apply the product to the eyebrows, starting from the head towards the body and tail. When applying, it is advisable to immediately set the desired direction for laying out the hairs. Select the exposure time depending on the density of the eyebrows, the porosity of the hairs, and changes in the artificial direction of the hairs compared to the natural one. Leave the composition on the eyebrows for: 6-8 minutes on thin hairs; 8-10 minutes on medium; 10-12 minutes for thick ones.
After the exposure time has expired, remove the drug using a dry cotton pad, without stretching the skin or pulling the hairs, so as not to injure them.
If there are hairs that do not lie in the desired direction, use a brush or brush to arrange them as needed for laying out the eyebrows. Since there may be different types of hairs on different parts of the eyebrow, the drug can be removed locally and immediately apply composition No. 2 - Fixing - to the corresponding areas. This will stop the reaction and not damage the hairs further while waiting for the permanent composition to be removed from other parts of the eyebrows.
3. Application of composition No. 2 - Fixing. Squeeze the composition onto the glove, into a glass/plastic container or into a SCULPTOR silicone palette (metal containers are prohibited). Using a silicone or synthetic brush, apply the product to the eyebrows, starting from the head towards the body and tail, or in the sequence in which composition No. 1 - Lifting was locally removed. Select exposure time. Leave the composition on the eyebrows for: 7-8 minutes on thin hairs; 8-10 minutes on medium; 10-12 minutes for thick ones. After the exposure time has expired, remove the drug using a damp cotton pad in the direction of the hairs. Dry your eyebrows using a dry cotton pad.
4. Application of composition No. 3 - Keramass. Pour the mixture into a glass/plastic container or into a SCULPTOR silicone palette. Using a brush or nylon brush, apply the product to the eyebrows. Wait at least 5 minutes or until the product dries completely; if there is a lot of it, remove the residue with a damp cotton pad. If the application was only on the hairs, you can correct and color the eyebrows without removing the residue. This way you can achieve hair coloring without darkening.
5. Marking and correction of eyebrows. Make markings using a technique that is convenient for you and perform eyebrow correction. It is recommended to do correction with tweezers or a mixed correction: tweezers + wax, but apply wax only in the area where there were no compounds, so as not to injure the skin with an excess of aggressive procedures.
6. Eyebrow tinting. Tint your eyebrows using SCULPTOR Eyebrow Gel Tint, a dye based on water-soluble components or with an oxidizing percentage of 2%. Painting should be done with synthetic brushes. Application is carried out according to the scheme selected by the master for the client. After the paint exposure time has expired, remove it with a damp cotton pad. Dry your hair completely using a dry cotton pad.
7. Application of composition No. 4 - Calming. Squeeze the composition onto the glove, into a glass/plastic container or into a SCULPTOR silicone palette (metal containers are prohibited). Using a silicone or synthetic brush, apply the product to the eyebrows, starting from the head towards the body and tail. Leave for 5 minutes, after the exposure time has expired, remove the residue with a dry cloth or leave on the client’s eyebrows until completely absorbed.
