Free delivery over UAH 3000 with 100% payment(does not apply to promotional products)

Beauty Wave Glue for lamination, 8 ml

0
  • 375 грн.

Product code: 621

Not in stock

Free shipping

International shipping

Delivery in Kiev

The adhesive is designed to be used with reusable silicone curlers to fix them on the client's eyelid and to fix eyelashes on the curler during the procedure of lifting and lamination of eyelashes.


How to use the Eyelash Lift Kit:

1. Carefully separate the lower lashes using pads or tape to isolate the lower lashes.

2. Gently apply a degreaser with a microbrush to clean the eyelashes from cosmetic residues, dust and grease.

3. Select the size of the silicone curler based on the length of the client's eyelashes: the shorter the eyelashes, the smaller the size of the curler.

4. Glue the curlers with a fixing gel as close as possible to the root zone of the eyelashes, fixing the curlers from the inner corner to the outer, slightly pulling the skin of the eyelid towards you.

5. Apply the fixing gel on the curlers in small areas, approximately 0.5 cm each, and carefully, using the applicator (side with teeth), lay the eyelashes on the roller. Eyelashes should be separate and parallel to each other and not overlap.

6. Using a microbrush, apply Softening Cream (composition No. 1) on the eyelashes in a uniform thin layer, retreating 2 mm from the roots and tips. Exposure time: 10-15 minutes (depending on the density of natural eyelashes). After the specified time, remove the remaining composition with a clean microbrush or a dry cotton swab.

7. After removing composition No. 1, apply Fixing Cream (composition No. 2) in a uniform thin layer, retreating 2 mm from the roots and tips of the eyelashes. Exposure time: 10-15 minutes (depending on the density of natural eyelashes). After the specified time, remove the remaining composition with a clean microbrush or a dry cotton swab.

8. Gently remove the curlers one by one. To easily remove the rollers, you can use a cotton swab slightly moistened with water: lift the roller at the outer corner of the eye, put a cotton swab under it and slightly twisting it move to the inner corner of the eye.

9. Remove the remains of preparations and fixing gel with a cotton pad moistened with water.

Other customers also bought

Beauty Wave Glue for lamination, 8 ml

The adhesive is designed to be used with reusable silicone curlers to fix them on the client's eyelid and to fix eyelashes on the curler during the procedure of lifting and lamination of eyelashes.


How to use the Eyelash Lift Kit:

1. Carefully separate the lower lashes using pads or tape to isolate the lower lashes.

2. Gently apply a degreaser with a microbrush to clean the eyelashes from cosmetic residues, dust and grease.

3. Select the size of the silicone curler based on the length of the client's eyelashes: the shorter the eyelashes, the smaller the size of the curler.

4. Glue the curlers with a fixing gel as close as possible to the root zone of the eyelashes, fixing the curlers from the inner corner to the outer, slightly pulling the skin of the eyelid towards you.

5. Apply the fixing gel on the curlers in small areas, approximately 0.5 cm each, and carefully, using the applicator (side with teeth), lay the eyelashes on the roller. Eyelashes should be separate and parallel to each other and not overlap.

6. Using a microbrush, apply Softening Cream (composition No. 1) on the eyelashes in a uniform thin layer, retreating 2 mm from the roots and tips. Exposure time: 10-15 minutes (depending on the density of natural eyelashes). After the specified time, remove the remaining composition with a clean microbrush or a dry cotton swab.

7. After removing composition No. 1, apply Fixing Cream (composition No. 2) in a uniform thin layer, retreating 2 mm from the roots and tips of the eyelashes. Exposure time: 10-15 minutes (depending on the density of natural eyelashes). After the specified time, remove the remaining composition with a clean microbrush or a dry cotton swab.

8. Gently remove the curlers one by one. To easily remove the rollers, you can use a cotton swab slightly moistened with water: lift the roller at the outer corner of the eye, put a cotton swab under it and slightly twisting it move to the inner corner of the eye.

9. Remove the remains of preparations and fixing gel with a cotton pad moistened with water.

Leave your feedback in the product: