STALEKS, MFI expert 10

Staleks Pro EXPERT 10 eyelash lamination tool helps to lay hairs on rollers during the lamination or bio-curling procedure. The thin sharp working edge is ideal for working with individual eyelashes, separating and carefully pressing them to the rollers.

The multifunctional Staleks Pro EXPERT 10 eyelash curling tool is made of high-alloy stainless steel with an L-shaped working part curved at 135 degrees. The specially designed shape and length of the tip are suitable for working with any length of eyelashes.

The Staleks Pro Expert 10 eyelash curling tool is equipped with a notched handle, so it lies comfortably and stably in the hand of the master, without slipping during the procedure.

It is advisable to buy the Staleks PRO Expert 10 eyelash lamination and curling tool together with rollers, tweezers, lamination and care products, replenishing the supply of products for the procedure.

Staleks eyelash lamination tool Pro EXPERT 10 — features:

• for eyelash care procedures;
• easy to work with any length of eyelashes;
• material — high-alloy stainless steel;
• handle with notch for stabilization in the hand of the master;
• can be disinfected;
• resistant to sterilization in dry heat and autoclave;
• diameter — 5.9 mm;
• total length — 130 mm, working part — 7 mm;
• bending angle 135 degrees;
• weight — 20 g.

Staleks eyelash curling tool Staleks Pro EXPERT 10 — usage:

1. Choose a roller of the desired size that fits snugly against the client's eyelid. Apply glue to the surface to fix the eyelashes.
2. With light movements of the L-shaped Staleks tool, move it along the eyelashes, pressing against the surface of the roller covered with glue. Start from the inner corner of the eye.
3. Fixation occurs gradually: move the working part from the base of the eyelashes to the tips, ensuring a tight fit of the hairs to the roller.
4. Use the thin working part to distribute the eyelashes parallel to each other. In case of crossing and uneven arrangement, the tool allows you to delicately correct them without damaging the shape.
5. When all the eyelashes are evenly arranged on the roller, check again for uniformity of their pressing.

Cleaning recommendations

1. Stalex instruments withstand all types of disinfection and sterilization (cold or hot).
2. Immediately after use, carefully remove contamination from the surface. Use a product for removing eyelash extension glue - it effectively removes the glue while preserving the surface of the instrument.
3. Prepare a disinfectant solution, following the manufacturer's instructions for time and concentration. It is recommended to choose products that destroy hepatitis B, C and ringworm viruses.
4. Sterilization. Place the instrument in a sterilization bag designed for dry heat or autoclave containers to avoid damage and to ensure proper air or steam circulation. Dry heat: at 180°C for 60 minutes, 160°C for 150 minutes.
5. When using an autoclave, sterilization time: at 120°C, 1.1 atm. pressure for 45 minutes; 132°C, 2 atm. pressure for 20 minutes. After sterilization in an autoclave, allow the instrument to cool for 1 hour - sudden changes in temperature can damage it.
6. Regularly check the operation of the autoclave or dry heat using biological indicators to ensure sterilization efficiency.

Storage features

1. Store the instrument in a dry, clean state, in a sterile, closed container. Choose a dry storage location to prevent rust and mold.
2. Avoid dropping, moisture, dust, loose and abrasive substances.